What is a table CNC plasma cutting machine used for and how thick can it cut?
- Share
- Issue Time
- Aug 31,2026
What is a table CNC plasma cutting machine used for?
The YOMI Table CNC plasma cutting machine is a compact, double-driven table machine for cutting carbon steel, stainless steel and non-ferrous metal sheets into any 2D shape. It is widely used for brackets, signs, base plates, frames, guards and small-to-medium structural parts in fabrication shops.
How thick can a table CNC plasma cutting machine cut?
With an optional flame torch, the machine can cut mild steel from 6 mm up to 150 mm. Plasma cutting thickness depends on the selected plasma power source, with options from 63 A up to 400 A including Yomi, Hypertherm and Huayuan power sources.
How accurate is table CNC plasma cutting?
The machine achieves auto-precision of ≤±1.0 mm. Accuracy depends on the rigidity of the square linear guide and gear-rack transmission, the quality of the torch height controller and the condition of consumables.
What materials can it cut?
It cuts any electrically conductive metal, including mild steel, stainless steel, aluminum, brass and copper. For aluminum and stainless steel, dry, clean compressed air is essential to avoid dross and excessive consumable wear.
What is the difference between a table type and a gantry type plasma cutting machine?
A table type machine is more compact, uses a fixed blade or slat table and is ideal for sheet metal up to roughly 1500 mm × 3000 mm. A gantry type is larger, supports heavier plate and wider travel, and is better suited for high-volume or oversized plate production.
What controller and software does it use?
It uses the Shanghai Fangling F2100B/F2300A CNC controller and Fangling F1621 torch height controller. Nesting is done with Starcam software, with Fastcam available as an option, so parts can be imported directly from CAD drawings.
Does it need a flame torch option?
The standard configuration uses one plasma torch. A flame torch can be added as an option and is recommended when you regularly cut very thick carbon steel where plasma would be slower or more expensive to run.
What routine maintenance does a table plasma cutter need?
Daily: inspect torch tips and electrodes, check air filters and drainage, and ensure the work clamp is clean. Weekly: clean slats, lubricate the square linear guides and rack, and inspect cables for arc damage. Monthly: back up parameter files and service motors and bearings as needed.
Technical Specifications of Table CNC plasma cutting machine for metal sheet
| Parameter | Value |
|---|---|
| Share | |
| Categories | Plate Cutting Machine |
| Brand | YOMI CNC Cutting&Welding Machinery |
| Model | YMT-1530 |
| Effective working size | 1500mm*3000mm |
| Control system | Shanghai Fangling F2100B |
| THC | Fangling F1621 |
| Motor and driver | Chuangwei and Leadshine |
| Software | Starcam nesting |
| Horizontal span | 1750mm |
| Effective cutting width | 1500mm |
| Longitudinal span | 3600mm |
| Effective cutting length | 3030mm |
| Plasma cutting power source | Huayuan LGK120A |
| Effective cutting range | 1500*3000mm or customized size |
| Cutting methods | 1 plasma torch （Flame torch for option） |
| Plasma power source | Yomi (63A,100A,120A,160A,200A,300A,400A )/Hypertherm /Huayuan power source for option |
| Safety Sensor | Anti-collision protection system |
| Transmission | Square Linear guide and gear rack |
| THC system | Fangling F1621 THC |
| Auto-precision | ≤±1.0mm |
| Motor and driver | Stepper motor（Servo motor optional） |
| Cutting thickness | 6-150mm MS(by flame),by plasma according to the plasma power source |
| Control system | Fangling 2100B |
| Software | Sarcam(Fastcam optional) |
| Working Voltage/Frequency | 1-Phase 220V/ 3-Phase 380V±10%/50HZ |
Product Gallery
Applications
The Table CNC plasma cutting machine for metal sheet is widely applied in steel structure prefabricated buildings, bridge and infrastructure construction, shipbuilding and marine engineering, heavy machinery manufacturing, power plant and industrial facilities, and offshore wind power structures.
Learn more about the Table CNC plasma cutting machine for metal sheet:
https://www.steelstructurer.com/pid18376201/Table-CNC-plasma-cutting-machine-for-metal-sheet.htm
For more information about Table CNC plasma cutting machine for metal sheet and other steel structure intelligent equipment, contact YOMI CNC Cutting & Welding Machinery. Our team of experts is ready to help you find the best solution for your manufacturing needs.