Double Drive Portable Gantry Type Plasma Cutting Machine
- Model
- YMBX-2060,YM-3070
Item specifics
- Working Conditions of Machine
- :
- Three-phase
- 380V (±10%), 50Hz (±2%)
- Single-phase
- 220V (±10%), 50Hz (±2%)
- Temperature
- -35℃～+45℃
- Relative humidity
- ≤95%
- Installation site
- clean and less dusty
- ventilated
- away from magnetic fields and vibration sources.
- Gas supply
- compressed air pressure must be above 0.6MP. (Used
Review
Description
Double Drive Gantry Type Portable Plasma Cutting Machine，stable operation at high and low speeds, stable cutting without shaking
1. Bilateral drive design
2.Thick aluminum alloy material
3.CNC Cutting System
4.The software has 61 basic graphics
5.Arc voltage height controlor
6.Cutting mode
|
Item |
Parameter
|
||
Model | YM-3070 | ||
Main frame | It adopts aviation aluminum | ||
Drive way | Bilateral drive | ||
Effective cutting area | 2300mm*6000mm(customized ) | ||
Beam size | High hardness aviation aluminum 3120mm* 90mm*120mm(L*W*H) | ||
Longitudinal rail | High hardness aviation aluminum 3500mm*120mm*90mm (L*W*H) | ||
CNC system | Shanghai Jiaotong University F2100 | ||
Motor/Drive | Beijing Start | ||
CNC horizontal moving lifting device | Yomi High-precision screw lifting | ||
Horizontal gas circuit cable drive | Gantry special widening engineering drag chain | ||
CNC Flame cutting torch | 1 set | ||
THC | Chengdu Zhongyu | ||
Nesting software and tutorial | Starcam (Fastcam optional) | ||
|
Rack |
High-precision 1-mold rack |
||
|
The control line |
Fully shielded to resist interference |
||
|
Cutting method |
Flame + plasma cutting |
