3 In 1 I Beam Assembling Welding Straightening Machine
- Model
- PHJ0818
Item specifics
- Workpiece height
- 200-2000mm
- Web thickness
- 6-40mm
- Flange width
- 200-800 mm
- Flange thickness
- 8-60mm
- Controllable deformation of thickness
- The Max 40mm
- Workpiece length
- 4000-15000mm
- Conveying speed of the workpiece
- 6000mm/min
- Welding process
- Single arc single wire
Review
Description
1.It is a special machine for assembling, welding and straightening of H beam/I beam/T beam.
2.It integrates the processes of assembly machine, gantry welding and straightening machine into one machine.
3.It significantly improves production efficiency ,reduces labour cost, saves installation space.
|
Item |
Technical Parameter |
||
|
Workpiece height |
200-2000mm |
||
Web thickness | 6-40mm | ||
Flange width | 200-800mm | ||
Flange thickness | 8-60mm | ||
Controllable deformation of thickness | The Max 40mm | ||
Workpiece length | 4000-15000mm | ||
Conveying speed of workpiece | 6000mm/min | ||
|
Welding speed |
150-1500mm/min |
||
|
Welding process |
Single arc single wire, Double arc double wire, Single arc double wire. |
1. Assembly Parts
2.Hydraulic Assembly
3.Welding Parts
4.Bilateral Welding
5.Flange Straightening Part
6.Parametric Interface
- Labor Saving:Traditional beam production line requires 5 workers, our 3 in 1 beam production line only needs 2 workers.- assembly, welding and straightening at the same time.
- Footprint Saving: The total length of traditional beam production line is about 90m, while 3 in 1 beam production line is about 30m lo, which saves two-thirds of loor area.- It can welding two seams once, while traditional only can welding one seam once.
- High Efficiency: Traditional beam production line needs to flip four times, 3 in 1 beam production line only needs to flip one time and the deformation is small.Saving 2/3 of the workspace.
